Lesson 1 - Introduction to Nonmetals
Topics:
Properties and behavior of solids, liquids, and gases; Boyle's Law; Laminar and turbulent flow; Mixed-phase systems
Learning Objectives:
– State the definition of a solid, a liquid, and a gas.– Demonstrate how to change a liquid to a solid.
– Demonstrate buoyancy.
– Identify an object less dense than water, and an object more dense than water.
——列表six possible combinations of matter.
Lesson 2 - Plastics
Topics:
Characteristics; Processing; Molding; Casting; Extruding; Reinforcing; Machining; Welding; Patching
Learning Objectives:
– State the definition of a thermoplastic and a thermoset.– Describe injection molding, foam molding, and extrusion.
– Select the best bonding agent for joining polyethylene parts.
– Describe the steps in patching a damaged area with glass-plastic material.
Lesson 3 - Rubber
Topics:
Properties; Processing; Kinds and uses; Vulcanizing; Foam rubber; Hose and tubing; Tank linings; Reclaiming rubber
Learning Objectives:
– Name four properties of rubber.– Explain the vulcanizing process.
– Select the best hose for handling oils or gasoline.
– Describe how to use a pinhole locator.
——列表the kinds of sheet rubber that should be kept on hand in the storeroom of an industrial maintenance department.
Lesson 4 - Wood
Topics:
Properties; Grades and defects; Measuring lumber; Plywood; Choosing wood; Joints; Preservation; Industrial uses; Fasteners
Learning Objectives:
– State the definition of hardwood and softwood.– Name the grades of softwoods and hardwoods.
– Describe a radial cut, a crosscut, and a tangential cut.
– Demonstrate how to calculate the number of board feet in a piece of 2 x 8 lumber 10 ft long.
Lesson 5 - Construction Materials
Topics:
Concrete; Masonry units; Brick; Mortar; Patching and repairing; Wallboard; Plaster; Glass
Learning Objectives:
——列表the ingredients in concrete.– State the definition of spalling, crazing, and dusting.
– Explain how to remove an oil stain from concrete.
– Demonstrate how to mix a small batch of mortar.
——列表the steps in repairing a hole in wallboard.
Lesson 6 - Insulating Materials
Topics:
Heat flow; Thermal, loose-fill, blanket, low-density, and acoustic insulation; Vapor barriers; Electrical insulation; Fire prevention
Learning Objectives:
– Name the ways by which heat can be transferred.– State the formula for determining the thermal conductivity coefficient (k value) of a thermal insulator.
– Demonstrate how to install blanket insulation.
– Select the best materials for use an electrical insulation where resistance to flame and high temperature is important.
——列表the safety rules that should be followed when working with insulating materials.
Lesson 7 - Paints and Coatings
Topics:
Protective materials; Substrates; Paint; Primer; Choosing a coating; Surface preparation; Application; Using colors; Special coatings
Learning Objectives:
——列表the factors to consider in selecting a protective coating.– Name the qualities and characteristics of pigments and vehicles.
——列表the safety precautions to follow when using paints containing solvent thinners.
——国家底漆的定义。
– Demonstrate how to prepare a metal substrate for coating.
Lesson 8 - Industrial Chemicals
Topics:
Safety; Soaps and detergents; Solvents; Acids; Aerosols; Oils; Refrigerants; Water-treatment chemicals; Fuels; Fire-fighting chemicals
Learning Objectives:
——列表the safety precautions to follow when working with liquid and solid chemicals.– Name the general classifications of cleaning agents.
– Select the best acid for cleaning stainless steel and aluminum.
– State the reasons why aerosol spray cans are potentially dangerous.
——列表considerations in selecting an oil for a particular use.
Lesson 9 - Adhesives
Topics:
Kinds of adhesives; Glues; Plastic welding; Acrylic-based adhesives; Other adhesives; Strength of adhesives; Tapes
Learning Objectives:
– State the definitions of adhesiveness, curing, drying, joint, pot, life, and tack.——列表the characteristics of thermosetting and themoplastic adhesives.
– Demonstrate the plastic-welding process.
– Select the best tapes for insulating and protecting electrical connections and wires.
Lesson 10 - Carbon
Topics:
形式和性质;电极和电阻;Carbon brushes; Industrial diamonds; Carbon seals; Graphite packing; Chemical resistivity
Learning Objectives:
——列表four uses of carbon and fabricated carbon products in industry.——列表three properties of carbon that make it useful in electrical and mechanical applications.
– Describe the carbon-arc welding process.
——列表the most common causes of brush noise.
– Demonstrate the correct method of cutting individual rings from a continuous length of braided packing.